INDUSTRIAL HEMP GROWING

Soil

Hemp thrives in similar growth conditions to corn. The optimal soil is deep, airy, and medium-heavy, with a nearly neutral pH value (around 6–7). It is less likely to grow well in compact cold soil, or in shallow, sandy, or acidic soil. Common hemp can also be cultivated at an altitude of over 1,000m.

Climatic conditions necessary to grow common hemp

The optimal temperature for seeds to sprout is of 20°C. Once the seed has sprouted, young seedlings can also withstand temperatures of up to 0°C, but their growth slows down in this case. The ideal temperature for hemp plants to grow and develop is 18–20°C, while the southern ecotypes also get along with higher temperatures.

Growth

The hemp vegetation cycle lasts from 90 to 150 days, while the plant maturation time depends on each individual variety, since they have all adapted to different climatic conditions. Early varieties, such as USO 31, Ferimon 12 and Finola, will mature in up to three months, since these varieties have adapted to the northern climate. Late varieties, such as Futura 75 and Santhica 27, which have adapted to warm southern climates, will mature at the beginning of October, while their vegetation cycle can also last from 140–150 days.

The hemp vegetation cycle can roughly be divided into two parts: the vegetation cycle and the flowering/maturing cycle. The vegetation cycle begins with sowing. During that cycle, the plant is growing intensively in height and developing leaves.

The beginning of the flowering cycle of common hemp is the plant's reaction to shorter days, while the time necessary to form flowers depends on the variety (and on its genetic adaptation to the environment), as well as on the temperature conditions that the plant has been exposed to.

The figure above shows the growth cycles of industrial hemp. The first two illustrations show the process of seed sprouting and the beginning of growth; the second two illustrations depict the vegetation cycle; the fourth illustration shows the beginning of the flowering cycle; the fifth illustration depicts the fully developed female flower; and the sixth illustration shows the end of the annual cycle of a hemp plant with ripe seeds.

 

GROWTH TIMELINE OF INDUSTRIAL HEMP

SPROUTING (0–4 or 9 days)

Sprouting occurs at a temperature of 10–15°C during sowing, in 4–9 days, which depends on the soil and the temperature. This is the most sensitive growth phase.

IMPLANTATION (4–9 days or 3 weeks)

The slow growth phase, during which the plant covers the ground. The plant reaches its correct density in about three weeks. After the end of this phase, the plant reaches a height of about 25–50 cm and has 3 pairs of leaves.

ACTIVE GROWTH (3 weeks to 2.5 months)

The period from the end of implantation to the beginning of the flowering cycle. During this period, the future yield of straw and fibre is created, if the needs of the plant in terms of nutrients and water are met (during this period, the plant needs the largest amount of nutrients and water). In this period, the plant is also the most susceptible to stop growing in height and, instead, start growing to the side.

FLOWERING

The emergence of the first flowers on a hemp plant mostly depends on temperature conditions that the plant has been subjected to since sprouting, such as shortening of the days, and on the hemp variety. In this period, growth slows down.

FULL BLOOM

At the stage when the last female flowers open, the plant is strongly dependent on light. A specific variety, grown in a specific area, will reach this stage at a precisely defined moment in time, regardless of when it was sown, and will also depend less on the weather conditions.

END OF FLOWERING

The end of the flowering period is the time defined by the fertilisation of the last female flowers, and also signifies the end of growth. During this time, the final straw yield is determined, which indicates the phases of straw and seed maturation to follow.

SEED MATURATION

Seeds mature in up to 40 days after full bloom. Before harvesting, however, the humidity of the seed and the availability of drying rooms must be considered, which can significantly delay the actual harvesting.

 

Sowing

The following conditions must be met for hemp sowing:

  • the plant must be sown in dry soil (during the sprouting phase, excess moisture can be a hindrance which results in poor, uneven germination and the presence of higher amounts of grass, against which there is no suitable solution),
  • the plant must be sown in warm soil (it is recommended to sow in the soil at a minimum temperature of 12–14°C),
  • the plant must be sown in a depth of 2–3cm,
  • the plant must be sown slowly, in well-levelled but not flattened soil,
  • after sowing, we recommend the field be levelled with a consistent leveller.

Sow the seeds with a grain or corn seeder in each bed (or by leaving every second bed empty). Early sowing as the main crop: Hemp is sown from mid-April to the end of May. 

Stubble sowing as follow-up crops: Sow hemp as a stubble crop after any type of grain. It is possible to sow hemp until mid-July, but we do recommend the use of late hemp varieties, such as Futura 75 and Santhica 27, for stubble crops. The sowing standard depends on the primary product we wish to grow with hemp. Therefore, the sowing method will be different, depending on whether we are growing hemp for fibre (straw), seeds, or flowers. For fibre crops: sowing standard of over 35kg of seeds/ha, bed spacing 15–18cm. The density of plants for producing fibre is of 250–300/m2. For seeds and flowers (and fibre): sowing standard of 30–35kg of seeds/ha, bed spacing 15–15cm, spacing within the bed of 5–10cm. The density of plants for producing seed is of 100–150/m2.

Crop rotation

The best way to protect plants from weeds, plant diseases and pests is crop rotation and sowing healthy, uninfected seeds. Hemp can be grown after any type of crop (root crops, grain legumes, perennial fodder legumes, and grains), and is also an excellent pre-crop for other crops, since they grow better after hemp. EXAMPLE: Year 1 or 2: corn, year 2 or 3: true grains + stubble catch crops/grain legumes, year 3 or 4: hemp. Weeds which can cause the most damage to hemp: Hemp broomrape (Orobanche ramosa) is a plant lacking chlorophyll, which feeds on hemp and rapeseed roots. This parasite needs hemp in order to sprout and grow. First, it forms an orange bulb on its roots, and then develops into a branched stalk with curved blue-violet flowers. The damage is mainly translated as dying plants, reduced density, and the emergence of different weeds. If hemp broomrape attacks hemp early and on a grand scale, it can completely destroy its yield. Therefore, crop rotation of hemp and rapeseed must be avoided.

Field preparation and fertilisation

In the autumn, the field must be well prepared: deep tillage, harrowing in the early spring, and breaking up soil in the summer:

  • in clay-limestone soil, winter tillage enables the retention of water and makes it easier for the soil to freeze. When the soil is airy, tillage can also be performed in the spring (surface preparation of the soil),
  • after winter tillage in March: surface preparation using a device for breaking up soil, which contributes to an accelerated process of root bulk growing,
  • after winter tillage in April: surface preparation using a device with a roller which breaks up soil and slightly levels the surface.

This prevents the soil from drying up, and also accelerates the process of germination of weeds which are then removed during the preparation of the sowing bed. In order to grow well, industrial hemp needs some additional plant nutrients but still needs to be fertilised less intensively than most other crops. Hemp grows successfully in the following quantities of available nutrients: 

80–100kg N/ha, 100kg P2O5/ha and 150kg K2O/ha (Piotrowski and Carus, 2014).

There is no need to fertilise arable land if the soil is rich in macronutrients. We recommend you perform a soil analysis, since an overdose of fertilisers provokes increased and uneven growth which shows in the side-growing of plants, and is unacceptable for the environment.

Conventional cultivation:

Nitrogenous lime is a very good nitrogenous fertiliser for hemp and must be worked into the soil a couple of days before sowing (the waiting period depends on the quantity of nitrogen used). This fertiliser is a source of nitrogen and also has pesticidal properties. Nitrogenous lime is considered to be the oldest artificial fertiliser which is also the most nature-friendly. Farmers avoid it since it costs more than other nitrogenous fertilisers. If we use mineral fertilisers in the spring, they must be worked into the soil at least 10 days before sowing, in order for the nutrients to be readily available to young seedlings.

Organic cultivation:

Hemp is an excellent candidate for organic cultivation due to its intense growth, which reduces or prevents the possibility of growing weeds. Using crop rotation, we also prevent the emergence of plant diseases and pests, which means there is also no need to use herbicides, fungicides, or pesticides. In organic farming, only the use of permitted fertilisers found in the catalogue of permitted products for organic farming is allowed. Recommended organic fertilisers:

  • well-settled or composted animal manure,
  • compost,
  • ground oil cake (pumpkin seeds, hemp seeds, sunflower seeds, linseed, rapeseed, etc.),
  • castor cake, neem cake (exported),
  • animal manure in pellets,
  • guano – bat manure (currently the best natural manure available for hemp)

The advantage of using organic fertilisers is that they contribute both micro- and macronutrients in the soil. The quantity of fertiliser we use depends on the type of fertiliser and the availability of nutrients in the soil, which is why we recommend you to perform a soil analysis before using any fertiliser. An indicative estimate for the use of organic fertilisers is of 30–50 t/ha.

Watering

Hemp is a very drought-tolerant plant. If you have the possibility of watering/irrigating the plant, its straw and/or seed yield will increase. It is recommended to add water (20–50mm/m2) when the plant is flowering and when the seeds are maturing, since this increases the yield of flowers or seeds.

Crop care

Mechanical weed control through weeding is only an option with some of the crops (for seeds). Even in this case, though, weeding is not necessary since hemp fills up the space with its growth, thus preventing weed overgrowth. If we sow rather sparingly (less than 30kg of seeds/ha), the soil must be hoed. It is recommended to protect the crops using mechanical deterrents. A particular issue are birds which like to peck out the sown seeds.

A SELECTION OF HEMP VARIETIES SUITABLE FOR SOWING IN SLOVENIA:

VARIETY:

ORIGIN:

SUPPLIER:

Uso 31

(monoecious) French variety

Hannah biz d.o.o.

Fedora 17

(monoecious) French variety

Hannah biz d.o.o.

Felina 32

(monoecious) French variety

Hannah biz d.o.o.

Futura 75

(monoecious) French variety

Hannah biz d.o.o.

Ferimon 12

(monoecious) French variety

Hannah biz d.o.o.

Santhica 27

(monoecious) French variety

Hannah biz o.o.o.

Santhica 70

(monoecious) French variety

Hannah biz d.o.o.

Epsilon 68

(monoecious) French variety

Hannah biz d.o.o.

Kompolti hybrid TC

(dioecious) Hungarian hybrid

Dejan R., Gorička ves d.o.o.

Monoica

(monoecious) Hungarian hybrid

Dejan R., Gorička ves d.o.o

Tisza

(dioecious) Hungarian hybrid

Dejan R., Gorička ves d.o.o

KC-Dora

(mono- and dioecious) Hungarian variety

Dejan R., Gorička ves d.o.o

Tiborszalasi

(dioecious) Hungarian variety

Dejan R., Gorička ves d.o.o

Finola

(dioecious) Finnish variety

No official importer

© Hannahbiz. Online store by Shopamine. Cookie SettingsMy Data

In addition to mandatory cookies, we also use analytical and advertising cookies, as well as social network cookies on the Hannahbiz website.

If you agree with this, please click on the I ACCEPT button. For a detailed description and in order to set the use of individual cookies, click on the COOKIE SETTINGS link.

Cookie Settings
×
Managing cookies on the Hannahbiz website
Mandatory cookies

are cookies that are essential for the proper functioning of the website, whereby the transmission of information in the communication network would not be possible without them. These cookies are also necessary in order for us to offer you the services, which are available on our website. They allow you to log in to the user profile, select the language, agree to the terms and conditions and identify the session of the user. We are not obliged to obtain consent for their use.

Analytical cookies

These cookies help us understand how our visitors use our website. They help us improve the user experience and identify user requirements and trends. We only use these cookies if you have explicitly consented to their use.

Advertising cookies

Third-party plug-ins and tools used as cookies enable various functionalities to work, help us analyse the frequency of visits and how the website is used. If an individual does not agree to the use of these cookies, they will not be installed, while it may however happen, that some interesting features of the website will not be available. We only use these cookies if you have explicitly consented to their use.

Social network cookies

These cookies make it possible for us to provide content for posts on social media and record your actions so that we may provide a more personal and enhanced user experience. We use these cookies only if you are logged into a Twitter, Facebook or Google user account when using the website.

1. General information about cookies 1.1. What are cookies?

Cookies are small text files that most modern websites store on the devices of their visitors, i.e. people who access certain websites on the Internet with their devices. The storing of cookies is under the complete control of the user, since users can easily configure their browser to restrict or disable the storage of cookies.

While visiting the website and its subpages and performing operations on the website, your computer, phone or tablet, automatically or after gaining your explicit consent, stores certain cookies through which various data can be recorded.

1.2. How do they work and why we use them?

Each visitor or shopper is assigned a cookie in order to identify him and ensure traceability at the beginning of each use of the online store. The servers provided to the company by the subcontractor automatically collect data on how visitors, shop owners or shoppers use the online store and store this data in the form of an activity log.

The servers store information about the use of the online store, statistics and IP numbers. Data on the use of the online store by shoppers can be used by the company for compiling anonymous statistics that help us improve the user experience as well as market products and / or services through an online store.

Indirectly and upon obtaining consent, the online store may also store external service cookies on the visitor's or shopper's device (e.g. Google Analytics) which are used to collect data on website visits. Regarding external services, the rules and general conditions on the processing of personal data, which are available at the links below, apply.

2. Permission to use cookies

If the settings of the browser with which you visit the website are such, that they accept all cookies, it means that you agree to their use. In case you do not want to use cookies on this website or you want to remove them, you may follow the procedure below. Removing or blocking cookies may result in suboptimal performance of this website.

3. Mandatory and optional cookies and your consent 3.1. We are not required to gain your consent for the use of mandatory cookies:

Mandatory cookies are cookies, that are essential for the proper functioning of the website, whereby the transmission of information in the communication network would not be possible without them. These cookies are also necessary in order for us to offer you the services, which are available on our website. They enable login into the user profile, language selection, agreeing to the terms and conditions and user session identification.

3.2. Cookies that are not necessary for the normal operation of the website, and for which we are obliged to obtain your consent (optional cookies):

Analytical cookies

These cookies help us understand how our visitors use our website. They help us improve the user experience and identify user requirements and trends. We only use these cookies if you have explicitly consented to their use.

Advertising cookies

Third-party plug-ins and tools used as cookies enable various functionalities to work, help us analyse the frequency of visits and how the website is used. If an individual does not agree to the use of these cookies, they will not be installed, while it may however happen, that some interesting features of the website will not be available. We only use these cookies if you have explicitly consented to their use.

Social network cookies

These cookies make it possible for us to provide content for posts on social media and record your actions so that we may provide a more personal and enhanced user experience. We use these cookies only if you are logged into a Twitter, Facebook or Google user account when using the website.

4. How to manage cookies?

You can manage cookies by clicking on the "Cookie settings" link in the footer of the website.

You can also control and change cookie settings in your own web browser.

In case you want to delete cookies from your device, we advise you to follow the described procedures, by doing so, you will most likely limit the functionality of not only our website but also most other websites, as the majority of modern websites use cookies.